Answering your search for reliable B Series engine mount bolts, this guide identifies top options for Honda and Acura builds. The top picks are best for enthusiasts upgrading engine and transmission mounts, rebuilding gear connections, and ensuring corrosion resistance. The list includes sets with complete hardware, ideal for stock or aftermarket brackets, and those offering superior strength for high-performance installs. The buyer-friendly table below highlights each product at a glance to aid quick comparison.
| Product | Best For | Notes |
|---|---|---|
| Engine Mount Bolt Kit B Series EG DC Civic Integra | Complete hardware for B-series engines | High-tensile steel, corrosion resistant |
| PTNHZ B Series Transmission Bolt Kit | Rustproof bolts for transmission fit | Metal hard engine screws |
| B Series Transmission Bolt Kit (Rustproof) | Direct fit for B16/B18/B20 | Bell housing, starter, T-mount included |
| B Series Transmission Bolt Kit for Honda Civic/Integra | General B-series mounting hardware | Includes multiple bolt types |
| Brand Valve Cover Mount Bolt (RemTune) | Valve cover bolts for B/H series | OEM spec, 10.9 grade |
Engine Mount Bolt Kit B Series EG DC Civic Integra
This kit provides a complete set of high-strength fasteners for securing Honda B-series engines and gearboxes to mountings, covering bolts, nuts, and washers for cylinder block, bracket, chassis, and gearbox points. It is designed for precise alignment with original or aftermarket brackets, ensuring factory-standard installation. The hardware is manufactured from high-tensile steel for durability and rust resistance. Best for builders replacing multiple mounting points or upgrading to a corrosion-resistant solution.
Best for: B-series engine swaps or rebuilds needing a full hardware set with robust corrosion resistance. Caution: Verify compatibility with your specific bracket configuration to avoid mismatches.
PTNHZ B Series Transmission Bolt Kit
This kit supplies rustproof, metal engine screws designed for Honda Civic or Acura Integra B-series engines. Its hardware is suitable for securing the transmission to the engine, and it is compatible with B16, B18, and B20 variants. Best for those performing a straightforward transmission installation with direct fitment and minimal extra hardware. A potential limitation is that some kits may not include every small fastener needed for unique bracket configurations.
Best for: Direct engine-to-transmission mounting projects on common B-series builds. Caution: Double-check that the included screws match your bell housing and bracket types.
B Series Transmission Bolt Kit (Rustproof)
Designed for direct compatibility with Honda Civic and Acura Integra B-series engines (B16, B18, B20) and 5-speed transmissions, this kit provides a comprehensive set of bolts, including bell housing, rear T-mount, and starter bolts. It emphasizes corrosion resistance and high strength, with a polished finish for deformation protection. Best for straightforward installation where full bolt coverage is needed. Limitation: Some lower bracket combinations may require additional hardware not included in the kit.
Best for: Complete transmission-to-engine mounting projects. Choose this if: You want an all-in-one bolt set designed for common B-series assemblies.
Brand Valve Cover Mount Bolt (RemTune)
These valve cover mounting bolts are compatible with Honda Integra, Civic, and B16/B18 H-series engines. They are replacement hardware with OEM specifications, offered in a 4-pack. The kit uses 10.9-grade manufacturer hardware for high strength. Best for valve cover projects and top-end rebuilds where matching OEM dimensions and fit are important. Limitation: This is a focused subset, not a full engine-to-transmission bolt kit.
Buying Guide: Key Purchase Considerations
- Compatibility: Confirm engine model (B16, B18, B20) and whether the bolts fit your block, bracket, and trans mount configurations.
- Material and Grade: Look for high-tensile steel or 10.9-grade hardware for durability and rust resistance in harsh under-hood environments.
- Completeness: Decide if you need a full kit (block to gearbox) or focused hardware (valve cover or bell housing) to minimize waste and cost.
- Corrosion Protection: Rustproof or coated fasteners extend service life in areas with moisture or road salt exposure.
- Installation Considerations: Ensure the kit includes the necessary washers, nuts, and spacers or verify what else you need for a proper fit.
- Installation Time: A complete kit generally saves time by reducing the need for sourcing extra bolts separately.
FAQ
- Q: Are these bolts suitable for aftermarket bracket setups?
A: Many kits are designed for both original and aftermarket brackets, but verify the exact bolt sizes and thread pitches for your setup. - Q: Do these sets include washers and nuts along with bolts?
A: Several kits provide complete hardware, including bolts, nuts, and washers; check product details for inclusions. - Q: Can I reuse old bolts when upgrading to a high-tensile kit?
A: It’s generally recommended to replace old hardware with new high-strength fasteners to ensure proper clamping force and reliability. - Q: Is corrosion resistance necessary for every install?
A: In humid or salted environments, rustproof hardware significantly extends life and reduces the risk of fastener failure. - Q: What is the best option for a complete B-series engine rebuild?
A: A full mounting bolt kit that covers engine block, brackets, and transmission bolts is typically the best choice to ensure compatibility and installation efficiency.