Find the right 22 cal scope mount to improve accuracy, stability, and repeatable zeroing. This guide highlights five top-value options suited for different shooter needs—from compact air rifles to precision rimfires. Ideal buyers include casual sport shooters,plinkers seeking quick-access systems, and hobbyists upgrading to better mounts. Below is a quick summary table of the featured products to compare key traits at a glance.
| Product | Rail Type | Height | Pieces | Best For |
|---|---|---|---|---|
| 360 Tactical Pack of Two Scope Rings | 11mm Dovetail | Medium | 2 | Air rifles and lightweight rimfire setups |
| LONSEL 1” Dovetail Scope Rings | 11mm Dovetail | High or Medium | 2 | Versatile mounting on 11mm rails |
| CVLIFE Precision 1 Inch Dovetail Rings | 11mm/3/8″ Dovetail | Standard | 2 | Budget-friendly, easy installation |
| CVLIFE 1 Inch Scope Rings | Dovetail and Picatinny compatible | Standard | 2 | Flexible rail compatibility |
| Bontok 11mm to 21mm Converter Base | 3/8″ to 7/8″ Converter | Low | 1 | Convert 11mm to 21mm on legacy setups |
360 Tactical Pack of Two Scope Rings
Best for budget-conscious shooters needing a reliable pair of rings for 22 caliber air rifles or rimfires. The pack includes two rings with a 3/8” dovetail mount and a 1″ diameter, medium profile design. They are suitable where a compact, sturdy mounting height helps maintain a low bore axis for quick target acquisition. The two-pack setup is ideal for front and rear optics alignment on lighter rifles.
Why selected: Value plus simplicity. The pack provides a straightforward install with compatible 11mm/3/8″ dovetails and medium height for a comfortable cheek weld on many compact rifles.
Caution: Confirm your rifle’s dovetail dimension and ensure the medium height aligns with your scope’s objective lens to avoid interference with the barrel or bolt handle.
LONSEL 1” Dovetail Scope Rings (2 Pack)
Better for shooters who want flexible height options and a dependable hold on 11mm rails. This 2-pack offers high or medium profile choices to tailor cheek weld and eye relief for different scopes. The dual rings help maintain windage and elevation stability across repeated shots, especially on compact rimfire setups.
Best for: Versatility and straightforward mounting. If you frequently swap scopes or switch between rifles, choose this set for its adaptable profiles.
Caution: Ensure you pick the correct ring height to avoid scope contact with the firearm’s top rail when cycling the action or mounting a larger objective lens.
CVLIFE Precision 1 Inch Dovetail Rings
Choose this set for straightforward mounting on 11mm and 3/8″ dovetail rails. The 1-stop pin design adds a simple mechanical reference to help with initial zeroing and repeatable alignment. The two rings provide reliable clamping without requiring specialized tools beyond standard hex keys.
Best for: Shooters seeking a reliable, no-frustration mount that is easy to install and suitable for a range of 22 cal firearms.
Caution: Check your scope’s tube diameter and rail compatibility; some older setups may benefit from a shim or washer to optimize alignment and prevent side-to-side movement.
CVLIFE 1 Inch Scope Rings
These rings are designed for flexibility across dovetail rails and Picatinny rails via the right-fit design. They come in a two-piece setup that supports quick scope changes and stable hold for 22 caliber rifles. The construction emphasizes durability under routine field use and training sessions where rapid re-zeroing may occur.
Best for: Users who rotate optics or experiment with different scopes while keeping a single, dependable ring set on hand.
Caution: While versatile, verify your rail type and ensure your mounts are tightened to recommended torque specs to avoid scope shift during recoil-free shots from air rifles or light rimfires.
Bontok 11mm to 21mm Converter Base
Best for converting 11mm dovetail setups to 21mm platforms, this low-profile converter base expands compatibility for various optics and mounts. It’s a practical choice for shooters with older or limited-dovetail rails who want to use modern Picatinny or 21mm systems without replacing the entire mounting hardware.
Best for: Extending compatibility on legacy rifles or air rifles that have 11mm rails but desire a broader mounting interface for certain scopes or accessories.
Caution: The converter base adds a small height increase; verify if this change affects cheek weld and rifle balance for your preferred shooting stance.
Buying Guide
- Rail compatibility: Most 22 cal setups use 11mm dovetail or 3/8″ dovetails. Confirm your rifle’s rail type before choosing rings or bases.
- Ring height and scope fit: High, medium, or low profiles affect cheek weld, eye relief, and clearance. Match height to your scope objective diameter and your stock contour.
- Material and durability: Look for aluminum alloys with corrosion resistance and precise clamping to resist shifting during repeated shots.
- Clamping design: Two-piece rings provide easier alignment, but ensure the inner diameter matches your scope tube (commonly 1″) to avoid slippage.
- Conversion options: If you own rifles with nonstandard rails, a converter base can save gear without purchasing an entirely new mounting system.
- Installation and torque: Use standard hex keys; tighten rings evenly in a crisscross pattern to prevent scope tilt and keep a true bore alignment.
Frequently Asked Questions
- What is a 22 cal scope mount best used for? It stabilizes optics on rimfire and air rifles, improving consistency and repeatable zeroing.
- Why choose a two-piece ring set? It allows precise alignment with the scope’s vertical and horizontal axes and easy swapping of optics.
- How do I know which height to pick? Consider your scope’s objective diameter and the stock’s cheek weld; height should prevent barrel contact and maintain a clear sight picture.
- Can I use a converter base on an 11mm rail? Yes, a converter base expands compatibility to 21mm or Picatinny accessories, broadening mounting options.
- Are these mounts suitable for field use? Yes, provided they are installed correctly with proper torque and cross-checked with a bore sight after mounting.
- What if I have a mix of rings and bases from different brands? Mixing brands can work, but ensure compatibility with rail dimensions and clamping standards to avoid instability.