Answering the need for safer, more functional outdoor spaces on toy haulers, this guide highlights five ramp deck kit options designed to convert rear ramps or garage doors into stable patios. These kits are best for owners seeking easy installation, high load support, and universal compatibility across common RV doors. The top picks vary in fit, load rating, and materials to suit cargo haulers, weekend warriors, and utility trailer users alike. The brief table below compares the five products at a glance for quick decisions.
| Product | Best For | Key Benefit | Compatibility Note |
|---|---|---|---|
| Conversion Cable Kit for Toy Hauler Patio Door | General toy haulers | 1800 lb load, universal ramp fit | 6’6″–7’4″ door heights |
| Conversion RV Cable Kit for Toy Hauler Patio Door 109″ | Budget-conscious upgraders | Easy install, 109″ cable | Height range 6’6″–7’4″ |
| 109″ Upgrade Toy Hauler Patio Kit | Higher durability needs | Thicker stainless steel cables | Bracket system 2315891 compatible |
| Sentry Screens Toy Hauler Screen | Bug prevention with open patio | Magnetic closure, fiberglass mesh | Fits up to 8.5’H x 10.5’W |
| Lippert Ramp Door Spring Replacement | Component upgrade for reliability | Corrosion-resistant, exact match | Medium duty, black powder coat |
Conversion Cable Kit for Toy Hauler Patio Door
This kit converts a ramp or garage door into a stable patio platform. It is designed for universal ramp door compatibility, fitting door heights from 6’6″ to 7’4″. It uses reinforced stainless steel cables and heavy-duty adjusters to support up to 1800 lbs, distributing load across mounting points. Best for buyers needing a versatile, high-load solution without altering the door structure.
Best for: General toy hauler owners who want a straightforward patio conversion with strong load support. Choose this if you need wide compatibility and a stable, level surface for seating or gear placement.
Caution: Ensure mounting points can bear the full load; improper installation can impact stability. The kit relies on precise alignment across varied trailer configurations.
Conversion RV Cable Kit for Toy Hauler Patio Door 109″
This kit is marked by its straightforward installation and 1800 lb maximum load. The total cable length is 109″, designed for doors 6’6″ to 7’4″ tall. It emphasizes simple setup and reliable support for turning the ramp into a deck without modifying the door brackets.
Best for: Value-minded buyers who want an easy upgrade that covers standard toy hauler doors. Better for those with standard 109″ cable needs and quick installation.
Caution: Verify that brackets attach to structurally strong spots on the trailer to carry the combined weight of people and gear.
109″ Upgrade Toy Hauler Patio Kit
This kit combines robust load-bearing with wide compatibility for 2315891 brackets, supporting 6’6″–7’4″ doors. It uses thicker stainless steel cables and high-strength metal brackets with anti-rust coating to improve durability in outdoor conditions. It helps prevent sagging and supports safe, full closure of doors without removing brackets.
Best for: Buyers needing stronger hardware and corrosion resistance for longer-term use. Choose this if you want a durable upgrade that maintains door clearance and safety.
Caution: The system requires correct bracket compatibility; confirm the bracket model and door height before purchase to ensure fit.
Sentry Screens Toy Hauler Screen
The Sentry Screens option provides a pest-free open-air experience with a magnetic closure and fiberglass mesh trimmed to fit ramp patio doors up to 8.5’H x 10.5’W. It helps keep insects out while allowing ventilation and fresh air. Best for campers who want an instant, built-in screen solution for the deck setup.
Best for: Those prioritizing bug prevention and airflow when the ramp deck is in use. Choose this if you often camp in buggy environments and want a ready-made screen insert.
Caution: May not integrate with all non-standard door frames; verify frame compatibility before purchasing.
Lippert Ramp Door Spring Replacement
The Lippert Ramp Door Spring Replacement is a practical upgrade for reliability. It offers corrosion-resistant powder coating and an exact-fit replacement for mid-duty applications. This component-focused option is best for owners who want to address a known failure point rather than a full deck conversion.
Best for: Owners with existing ramp systems seeking a targeted improvement rather than a full kit. Avoid this if you need a complete ramp-to-deck solution; this is a component upgrade.
Buying Guide: Key Purchase Considerations
What should you check before buying a toy hauler ramp deck kit?
- Door height compatibility: Most kits target 6’6″–7’4″ doors. Confirm your trailer’s exact height.
- Weight rating: Look for a kit that supports at least 1800 lbs to cover people and gear on the deck.
- Material durability: Stainless steel cables with corrosion protection extend outdoor life in rain and sun.
- Installation complexity: Some kits are designed for quick installs; others require bracket alignment and mounting.
- Bracket and bracket-system compatibility: Ensure the kit matches your trailer’s bracket model or system.
- Ventilation and safety: If you plan to leave the ramp open, consider screens or additional braces for stability.
How to Decide Which Kit Is Right for You?
Consider your typical camping setup and the level of conversion you need. If you want a high-load, universal solution for varied trailers, prioritize Kits with 1800 lb support and wide door compatibility. If you mainly want to convert for occasional use and value, simpler 109″ cable kits may suffice. For bug-conscious campers, a built-in screen option adds benefit. For ongoing reliability, component upgrades like spring replacements improve door performance without full deck changes.
Frequently Asked Questions
- What is the typical weight a toy hauler ramp deck kit can support?
- Do these kits require motor or tools beyond standard installation?
- Will these kits fit all toy hauler ramps?
- Is a screen option necessary when converting a ramp to a deck?
- Should I choose a thicker cable kit over a standard one?
- Are there safety considerations when using a converted deck?
Most kits in this guide are designed to support up to 1800 lbs, distributing weight across mounting points for safety.
Most kits require basic tools and do not need motorized components; follow the included installation steps for proper fit.
Hardware is designed to fit a range of ramps and door heights, but verify door height and bracket compatibility before purchase.
Screen options are optional; they provide airflow and bug protection but are not required for deck stability.
Thicker cables offer improved durability and load distribution, which is beneficial for frequent use or heavy loads.
Yes. Ensure the deck is level, the ramp is securely braced, and users avoid exceeding weight limits or standing near edges during operation.