Direct answer: If you own a 110cc pocket bike or CRF50-style pit bike, these plastic kits offer protective, stylish bodywork that fits CRF50F/XR50 and many clones. They’re best for riders seeking easy installation, enhanced appearance, and protection against mud and debris. The top picks are suited for different rider types—from casual recreational riders to outdoor enthusiasts who ride in mixed terrain. The following sections compare five variants, focusing on compatibility, material quality, and practical suitability for your bike setup.
| Product | Best For | Notes |
|---|---|---|
| CRF50 Plastics Kit Pit Bike Parts Fairings Fenders | Broad compatibility; clone bikes | ABS, water/heat resistant; includes protection film |
| CRF50 Plastic Kit Red White XR50 Plastic Fender Kit | Budget replacement; XR50 and copies | ABS, 7-piece set; simple installation |
| Plastic Set For Chinese 2 Stroke 47cc 49cc Apollo Orion | Mini bikes with Apollo/Chinese variants | Color matched; compatibility noted in description |
| Podoy CRF50 Plastics Kit ABS Body Fender Fairing Set | Complete dirt bike plastics refresh | AbS plastic; includes full fairing kit with bolts |
| Gilan Ignition Starter Key Switch Kit | Electrical upgrade for ignition access | 4 wires, 2 keys; compatible with X-15 and X-19 |
CRF50 Plastics Kit Pit Bike Parts Fairings Fenders
Reference: The CRF50 SSR 125 plastics kit is designed for CRF50F, XR50R, XR 50, SSR 110, SSR 125, Coolster, Baja and many 50cc-160cc bikes. It uses high-grade ABS material, offering water and heat resistance with good elasticity. The set is described as giving a shiny, dynamic look and includes a protective surface film to ensure flawless delivery. Best for riders seeking wide compatibility and durable exterior protection, especially for outdoor use. A potential limitation is that exact mounting hole matches may vary across bike models, so some adaptation might be required.
Best for: Riders with CRF50 family bikes or Chinese clones seeking a complete plastics refresh. Why selected: broad compatibility and durable ABS construction support daily outdoor riding.
Caution: Confirm hole alignment and tank area fit before installing on non-OEM sheets.
CRF50 Plastic Kit Red White XR50 Plastic Fender Kit
Reference: Lucky Seven’s XR50 plastic kit is compatible with Honda CRF50 XR50, SDG, SSR, and many Chinese 50cc-160cc bikes. The kit includes front fender, rear fender, tank shrouds, side panels, and a wind shield, all in ABS plastic with good elasticity and heat resistance. Best for value-focused buyers needing a complete set that mirrors original factory shapes for straightforward installation on CRF50 and XR50 copies.
Best for: Enthusiasts who want a full, factory-shape plastics upgrade at a lower cost. Why selected: 7-piece set with a direct fit for CRF50 and XR50 family bikes.
Caution: Verify that your bike’s mounting points match the included components, as some copies vary in design.
Plastic Set For Chinese 2 Stroke 47cc 49cc Apollo Orion
Reference: The Apollo Orion mini dirt bike plastics are designed for Chinese 47cc-49cc bikes and similar 2-stroke small-displacement models. The color is described as matching the image on the listing. Best for owners of Apollo Orion or similar clones who want a simple, color-matched replacement set for basic cosmetic and protective coverage.
Best for: Mini-dirt bike owners needing a color-consistent replacement kit. Why selected: Direct compatibility with Apollo/Orion-styled bikes and straightforward installation.
Caution: Fitment notes indicate look-alike compatibility; verify model and mounting before purchase.
Podoy CRF50 Plastics Kit ABS Body Fender Fairing Set
Reference: Podoy’s ABS plastic CRF50 plastics kit is compatible with CRF50F, XR50, SDG, SSR and many similar 50cc-160cc pit dirt bikes. The kit includes a front fender, rear fender, two tank covers, two side panels, a front number plate, and bolts. Best for riders who want a complete, comprehensive replacement set that blocks mud and spray and restores a factory look at a lower cost than OEM parts.
Best for: Riders seeking a full plastics replacement with an accompanying bolt kit. Why selected: Complete 7-piece set; durable ABS with a glossy black finish for a refreshed look.
Caution: Compare original mounting holes and seat area to ensure compatibility with your exact model.
Gilan Ignition Starter Key Switch for X-15 X-19
Reference: This ignition key set is designed for 110cc and 125cc super pocket bikes, with 4 wires, 2 male plugs, and 2 keys. Best for riders who need a straightforward ignition upgrade or replacement that fits X-15 or X-19 models. The kit’s electrical focus complements plastic upgrades by ensuring reliable start/stop functionality for daily use.
Best for: Riders needing a reliable ignition upgrade for 110cc/125cc pocket bikes. Why selected: Simple 2-key system with a 4-wire harness for common Super Pocket Bike models.
Caution: Ensure compatibility with your specific ignition harness layout before purchase.
Buying Guide: Key Purchase Considerations
- Compatibility: Check model lists carefully. CRF50, XR50, SSR, and various 50cc-160cc clones are common targets, but exact hole alignment can vary.
- Material: ABS plastic is common for durability and impact resistance; verify whether the finish matches your bike’s styling goals.
- Completeness: Decide between 7-piece sets (fenders, shrouds, panels, number plate) and smaller kits based on what is missing or worn on your bike.
- Installation: Look for sets with identical shapes to factory parts or with clear mounting notes. Some kits require minor adaptation for non-OEM frames.
- Aesthetics vs. protection: Glossy finishes look new but may show scratches; matte or textured finishes can hide wear while still protecting.
- Auxiliary parts: If upgrading ignition or electrical components, confirm compatibility with your bike’s wiring harness and connector types.
Frequently Asked Questions
- Q: Will these plastics fit my 110cc pocket bike? A: Most kits list compatibility with CRF50, XR50, SSR and various 50cc-160cc clones. Verify model and mounting hole alignment before ordering.
- Q: Are the plastics made of durable material? A: ABS plastic is commonly used for its elasticity and heat resistance, but finish and thickness vary by kit.
- Q: Do I need professional installation? A: Simple kits may install at home, but some models require minor hole alignment or drilling for a perfect fit.
- Q: Do these sets include all necessary fasteners? A: Some sets include bolts; others may require you to reuse existing hardware or purchase extra hardware separately.
- Q: Can I mix brands for a custom look? A: Yes, but ensure mounting points and panel sizes align to avoid gapping or misalignment.
- Q: Is there a warranty or return policy on these plastics? A: Warranties and returns vary by seller; check Amazon listing specifics before purchase.